The VFD complies with the following standards:
EN ISO 13849-1 | Safety of machinery-safety related parts of control systems - Part 1: general principles for design |
IEC/EN 60204-1 | Safety of machinery. Electrical equipment of machines. Part 1: General requirements. |
IEC/EN 62061 | Safety of machinery – Functional safety of safety-related electrical, electronic and programmable electronic control systems |
IEC/EN 61800-3 | Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific test methods |
IEC/EN 61800-5-1 | Adjustable speed electrical power drive systems – Part 5-1: Safety requirements – Electrical, thermal and energy |
IEC/EN 61800-5-2 | Adjustable speed electrical power drive systems – Part 5-2: Safety requirements. Functional. |
UL 508C | Power conversion equipment, 3rd edition. |
C22.2 No. 274-13 | Adjustable speed drives, 1st edition. |
The CE mark is attached to the drive to verify that the drive follows the provisions of the European Low Voltage and EMC Directives.
The markings such as "UL" and "CUL" on the nameplate vary depending on actual certification status. The AC 3PH 200V–240V and 380V–480V drive models have been certified to comply with UL 61800-5-1 and C22.2 No. 274-17, and the AC 3PH 520V–600V drive models have been certified to comply with UL508C and C22.2 No. 274-13.
The EMC Directive defines the requirements for immunity and emissions of electrical equipment used within the European Union. The EMC product standard (EN 61800-3:2004) covers requirements stated for drives. See section B.6 EMC regulations.